AM Skin: Android

My Galaxy S : http://www.youtube.com/watch?v=FvqtQyKvIo4
First you need to put on S5620XEJE1. VERY MPORTANT IF YOU WANT YOUR PHONE TO WORK AT ALL. Not proper firmware+android mod results that phone can't start(boot). this description is translated from hungarian. P.S.: I do NOT take any responsibility if you mess it up. If you're not sure, don't even start!!!

I AM NOT A FREE CUSTOMER SERVICE SO DON'T BUG ME WITH THIS, I HAVE A JOB.

BE CAREFUL IT'S A HACK, IT MAY LEAD TO MALFUCTION AND/OR LOSS OF WARRANTY!!! YOU CANNOT MESS UP YOUR PHONE'S HARDWARE ONLY THE SOFTWARE! SO IF YOU MIX SOMETHING WITH FIRMWARE, you don't have to take it to service, just TRY AGAIN carefully.

To check which firmware you have, type: *#1234#, if not S5620XEJE1 then put on, I won't help if somebody skips firmware.


S5620XEJE1 firmware: http://www.multiupload.com/WVPSZ23KF4
multiloader: http://www.megaupload.com/?d=4SU51ENI
android mod & ENGLISH language patch: http://url4u.webs.com/apps/forums/topics/show/3425382-samsung-gt-s5620-monte-android-mod-theme-patch
samsung usb driver: http://www.mediafire.com/?dmuyy2dlgzv KIES is not needed


As for the upgrade, you need:

- ORIGINAL Samsung S5620 Samsung USB Cable
- Installed Samsung USB driver on the machine or Samsung Kies program
- MultiLoader flash program
- Firmware

The update process:

- Charge the battery
- Save all your personal stuff from your phone
- Take out the SIM card and memory card
- Check your SIM LOCK (not equal to the network lock), you enter the main screen: * # 7465625 # (need to scroll down the pop-up menu to see)
- If you have written to ON, then turn off the security settings menu
- Make a reset, home screen, enter: * 2767 * 3855 #
- After reboot, turn off the phone

- Install on the machine the Samsung USB driver (but it is sufficient that the KIES program is already installed on your machine).
- Download and unzip the zipped firmware file
- Start MultiLoader
- Check the top at BRCM2153
- Icon change to boot
- The point choose bootfiles Boot (boot) folder
- Check to full download
- Then select the next line points to the appropriate files: Amss, Apps, Rsrc1, Rsrc2, FS Factory, CSC, SHP APP, PFS
All these should be selected as appropriate, its clear and self explainitory. Check at picture on bottom. (the CSC is possible that specific folder).
- Make sure there is at the low Rsrc2 choose the version of the Factory of the PFS and FS files that belong in the same region

Should look EXACTLY like on the picture(on the bottom, check link). Any mistake: may cause MALFUNCTION!!!


- Put the phone in download mode: Push at the same time reduce volume+ camera+ power button for few seconds. If successful, then you'll see on the screen "download".
- After that, use the original Samsung USB cable to connect your phone to your computer and let Windows install the drivers.
- Click the search button on multiloader program, the port will indicate if a port has found your Monte.
- For security reasons, once again skim through the settings and make sure that the machine will not turn off during the update.
- Click the Download button in the program, and can begin the upgrade. It's about 5 minutes to complete the upgrade. Leave the phone alone! Do not turn off the machine, do not pull off the cable!
- The right lane will be when finished, then the phone will reboot automatically. Kies mode after restarting the computer will join, if you see the connection screen, you can pull the phone from the program and may be contacted.
- Then again, do a reset: * 2767 * 3855 #
- After restart, turn off the device, SIM card and put it back in the memory card, You're done!

Warning! Compliance with all the important points to ensure safety. Everyone is doing it, at his own risk, knowing that even the warranty may be voided if you mess up something. I do not take responsibility for it. If you are not sure, question on an Internet forum like darkforestgroup(google it best monte forum).

then put on ANROID MOD: this has nothing risky in it, if you have the S5620XEJE1 firmware you have nothing to fear, it you fail to put it on nothing will happen, try again

here is how it must look(on picture)


then put RES directory on phone, BUT not on ur memory card, on phone internal memory, essential(with bluetooth, or with cable), just copy it to main phone directory

apps_compressed.bin to apps, a Rsrc2_S5620(Low).rc2-t to RSRC2 (in multiloader of course and android mod, like on picture. dont forget to set control to LSI6410)

and everything set like on picture

hope it works

be precise, and follow everything

Reference pictures: http://www.kephost.com/images4/2011/1/12/qkjs6a6argjjxnpytswg.jpg

http://www.kephost.com/images4/2011/1/12/a167mx5gsdjvnl3gmxpp.jpg